Solvent Recovery Liners

Mid-States Equipment Manufactures Custom Solvent Recovery Liners

Mid-States Equipment Manufactures Custom Solvent Recovery Liners

Mid-States Equipment manufactures solvent recycler/recovery bags from one of the highest grade, high temperature materials available. We constantly research new materials in order to provide the highest quality product, while maintaining the lowest cost to our customers. Our bags are distributed and sold worldwide.

Companies use hazardous solvents to clean a variety of industrial parts and equipment including blankets used in the printing industry and spray guns used in auto body shops and specialized manufacturing. The type of solvents used include acetone, paint thinners, varsol, mineral spirits, toluene and printers’ solvents. These solvents are necessary because of their superior cleaning capability.  Spray gun cleaners and parts washers reuse solvent until dirty. Solvent recyclers recycle dirty solvent on-site and use solvent recovery liners for easy clean up.

ADVANTAGES OF OUR HIGH QUALITY SOLVENT RECOVERY LINERS AND BAGS
  • Special sizes made to order
  • A Polyamide 6/6 with excellent chemical resistance to most compounds and common organic solvents
  • Unaffected by lubricants, oils or refrigerants
  • No problem with exposure to aromatic and aliphatic hydrocarbons
  • Proudly made in the U.S.A.
  • Maintain high standards of quality control at all times
  • Our raw materials are ISO 9001 compliant
  • No order too small or too large
  • Individual bags packaged in rolls of 25
  • Rolls labeled with part number & bag size. Makes inventory & stocking easier
  • Most orders shipped within 24 hours via UPS
  • Excellent Product and Service
  • Quantity Discounts
  • All orders are custom manufactured to OEM standards or higher
  • Manufacturer of OEM bags for several large manufacturers of solvent recyclers
  • Still bags up to 54″ wide for all makes and models
  • Full 1/4″ bottom weld
  • Maximum operating temperature 450°F/226°C
  • Melt Point 500°F/260°C

Solvent Recovery Systems

Our Liners are manufactured for all makes and models of recycler machines, including but not limited to the following:

Our raw material widths range from 18 inches to 60 inches. Length is customized to your particular needs.

There are approximately 200 sizes of recovery liners to fit your needs.

We are also distributors of 60″ Centerfold Film and various other plastic films which are used in the manufacturing of plastic products of all types. Whatever the need, we have a material for your application.

Mid-States Equipment manufacturers custom sized solvent recovery liners and bags for all types and models of Solvent Recovery Systems.  Contact us today for a quote at 1-800-707-6727.

Thirty-day credit available with credit report and references.

In the Pollution Prevention Act of 1990, the preferred waste minimization options, as defined by Section 6602(b) of the Act, are prevention and environmentally sound recycling followed by treatment and disposal.

 

A 1994 guideline document (EPA/625/R-93/017) states that: “recycling should be used where possible to minimize or avoid the need to treat wastes that remain after viable source reduction options have been evaluated and/or implemented.”

Some Commonly Recycled Solvents:

  • Acetone
  • Alcohol
  • Amyl Acetate
  • Butyl Acetate
  • Ethyl Acetate
  • Ethylene Glycol Ethyl Ether
  • Isobutyl Acetate
  • Isopropyl Alcohol
  • Lacquer Diluents
  • Methyl Alcohol (Methanol)
  • Methyl Ethyl Ketone (MEK)
  • Methyl Isobutyl Ketone (MIBK)
  • Methylene Chloride
  • Mineral Spirits
  • Toluene (1-2-3)
  • Toluol (Aromatic Hydrocarbon)
  • Turpentine Gum
  • Xylene (1-2-3)

Request A Quote

Your Name (required)

Your Email (required)

Subject

Your Message

What size solvent recovery liner do you use?

How often do you reorder your liners?

How many bags do you order at a time?